™
BrewStation
Thank You!
Thank you for purchasing a Hamilton
Beach BrewStation. What makes
BrewStation so unique is also what
makes it a little different in the
beginning. We hope you enjoy your
BrewStation.
BrewStation Safety ........................ 2
Parts and Features ........................ 3
How to Make Coffee...................... 4
Optional Features .......................... 5
Cleaning Instructions .................... 7
Troubleshooting ............................ 9
Customer Service..........................10
Questions?
Call us first – our friendly associates
are ready to help you. Please don’t
return your product to the store.
In USA: 1-800-851-8900
In Canada: 1-800-267-2826
840123000
Parts and Features
1. Filter Basket
7. Water Reservoir
2. Water Level Guide
3. Coffee Tank
4. Coffee Level Guide
5. Coffee Dispenser
6. Drip Tray
8. Keep Warm Plate
9. Water Filter Lid*
10. Water Filter*
11. Water Filter Base*
12. Coffee Scoop
*optional feature
on selected models
3
How to Make Coffee
1. To ensure best possible taste, before 5. Place coffee tank on Keep Warm
first use clean
the unit by
following steps
listed in “To
Plate. Place filter
basket on coffee
tank.
Clean the Inside
of BrewStation.”
2. For optional features only:
6. Place a disposable paper filter in the
filter basket.
A.) If your model has a water filter,
follow steps list-
ed in “Optional
Use a good
quality cupcake
(basket) style fil-
ter (8 to 12 cup
Features.” A
water filter is
size). A perma-
not required to
nent filter may
make coffee in
also be used.
the BrewStation.
7. For each cup of coffee being made,
neatly place one
B.) If your model has a clock, set
clock before
level scoop or
tablespoon of
first use. Follow
the instructions
in “Optional
automatic drip
ground coffee
into filter basket.
Features.”
Be careful not
to get any
grounds inside
coffee tank. Close lid making sure it
is fully closed.
8. Clock model: press Auto/ON/OFF
twice for coffee
now and light
3. Fill coffee tank with desired amount
of cold water.
Holding coffee
tank level, use
Water Level
will glow. To
brew later, see
“To Program
Automatic Brew”
in “Optional
Features.”
Guide on inside
of coffee tank to
ensure correct
amount of water.
Do not exceed water MAX level.
4. Pour water from coffee tank into
Non-clock model: press ON/OFF
button once for
water reservoir.
coffee now and
light will glow.
4
9. DO NOT open lid during and just
after brewing
11. The BrewStation features a two-
hour automatic
shut off. To
to preserve the
coffee’s heat
and flavor.
turn off sooner,
press ON/OFF
button and
indicator light
will go out.
12. When finished, push ON/OFF
button to turn off, then unplug
BrewStation. Do not open cof-
feemaker until it has been turned off.
Always allow to cool before clean-
ing.
10. To dispense coffee, press dispenser
with a cup.
Remove cup
when desired
amount has
been dispensed.
Coffee may be
dispensed dur-
ing and after
NOTE: Care should be taken when
handling the coffee tank after brewing.
brewing.
Optional Features
Permanent Filter
Water Filter
The Permanent Filter takes the place of
disposable paper filters. Simply place
the Permanent Filter in the filter basket.
Rinse the Permanent Filter in hot water
before first use. Clean the Permanent
Filter under hot running water and let
dry. Permanent Filter can be placed in
top rack of automatic dishwasher.
1. Before first use, soak water filter in
cold tap water
for 15 minutes.
Then rinse
under cold run-
ning tap water
for 15 seconds.
2. Insert filter in base. Snap lid onto
base.
3. Place filter and filter holder in
reservoir.
4. Replace after 60 brew cycles of
coffee. Set your replacement month
by aligning the arrow with the month
you expect will represent 60 brew
cycles.
5. To replace, pull up on lid of filter
holder while holding filter base, turn
filter base to allow filter to drop out.
5
Optional Features
(cont.)
To Set Clock:
1. Plug in BrewStation. Numbers on the 3. Press H and M buttons until desired
clock will flash until you set time of
day or one minute elapses.
brewing time is
reached.
2. To set time of day, press H button to
set current hour
with AM or PM
as indicated on
left of the clock.
3. Press M button until you reach the
current time.
4. Press Prog button to confirm setting.
Digits will stop
flashing and
return to set
time of day.
To Program Automatic Brew:
1. Make sure clock is set for correct
time of day.
2. Press Prog button and digits will
flash.
5. Push Auto/ON/OFF button once and
“PRO” will be shown in display and
the ON/OFF light will flash indicating
the brew cycle will begin at the set
time.
NOTE: If the Auto/ON/OFF button
is pushed twice, the ON/OFF light
will glow and brewing will begin
immediately. Simply press the
ON/OFF button once to turn off and
once more to set programming mode.
6. Follow steps 3-12 in “To Make
Coffee.”
6
|